 |
The Security Walk Through Metal Detector 33 Zone with Pinpoint Detection is a walk through metal detector that uses 33 detection zones to detect any metal object on your body. The Walk Through Metal Detector comes with a pinpoint mode, which helps to locate hidden objects like knives and guns. This walk through metal detector can be used for security purposes in offices, banks, schools and other places where security is needed.
The Security Walk Through Metal Detector 33 Zone with Pinpoint Detection is made up of an outer shell made out of high quality plastic material that makes it durable against wear and tear caused by frequent usage in busy environments. It also has an ergonomic design which makes it easy to use by people of different heights and shapes without causing any discomfort during operation.
This walk through metal detector can detect metals like iron, brass, copper etc., but not plastic materials such as PVC pipes or glass bottles due to their high electrical resistivity values compared with other materials such as steel which have lower resistivity values than plastics do at room temperature (RT). When placed close enough together, these two types of materials have similar electrical properties so they cannot be distinguished from one another unless some other technique is used such as x-raying them first then taking measurements afterwards if necessary
| Quantity: | |
|---|---|
VW-33Z
vikingscan
8543709100
The walk through metal detector is a new type of security equipment that is widely used in airports, railway stations, schools, banks and other public places. It can be used to detect the metal on the human body or luggage. The main features are:
1. Detection range: It has 33 zones with pinpoint detection.
2. Scan speed: less than 10 seconds for each person;
3. Anti-interference ability: anti-jamming capability;
4. Humanized design: easy to operate by only one person;
5. Light weight and small size: easy to carry out;
The Walk Through Metal Detector (WTM) is the most common type of airport security equipment. It is used to detect the presence of metal in a person's body or on their clothing. The WTM can also be used to detect weapons, explosives and contraband. There are two types of WTM: fixed and walk-through. The fixed WTM is typically used in airports and bus terminals, while the walk-through WTM is used at checkpoints such as entry points for government buildings, prisons etc.
A typical walk-through metal detector consists of an electromagnetic coil that produces an alternating magnetic field, which induces eddy currents in any conductive material that passes through it. Any change in the magnetic field induces a voltage difference across the coil which is then amplified by electronics within a control panel box located near its base. This signal can be processed by a digital microprocessor system which will indicate whether there has been any change in the magnetic field strength caused by metallic objects passing through it.
Dimensions
(1) Overall sizes (mm): 2240 (height) x 900 (width) x 580(depth)
(2) Size of alley (mm): 2240 (height) x 760 (width) x 580 (depth)
Technical parameters:
Passage dimensions: Working power: 30W Voltage: AC:110V~220V
Working temperature: -20 °C ~ 55 °C
Product exterior dimension:
2200mm*800mm*600mm
Product interior dimension:
2050mm*700mm*600mm
Net weight: 75KG Gross weight: 90KGS
The walk through metal detector is a new type of security equipment that is widely used in airports, railway stations, schools, banks and other public places. It can be used to detect the metal on the human body or luggage. The main features are:
1. Detection range: It has 33 zones with pinpoint detection.
2. Scan speed: less than 10 seconds for each person;
3. Anti-interference ability: anti-jamming capability;
4. Humanized design: easy to operate by only one person;
5. Light weight and small size: easy to carry out;
The Walk Through Metal Detector (WTM) is the most common type of airport security equipment. It is used to detect the presence of metal in a person's body or on their clothing. The WTM can also be used to detect weapons, explosives and contraband. There are two types of WTM: fixed and walk-through. The fixed WTM is typically used in airports and bus terminals, while the walk-through WTM is used at checkpoints such as entry points for government buildings, prisons etc.
A typical walk-through metal detector consists of an electromagnetic coil that produces an alternating magnetic field, which induces eddy currents in any conductive material that passes through it. Any change in the magnetic field induces a voltage difference across the coil which is then amplified by electronics within a control panel box located near its base. This signal can be processed by a digital microprocessor system which will indicate whether there has been any change in the magnetic field strength caused by metallic objects passing through it.
Dimensions
(1) Overall sizes (mm): 2240 (height) x 900 (width) x 580(depth)
(2) Size of alley (mm): 2240 (height) x 760 (width) x 580 (depth)
Technical parameters:
Passage dimensions: Working power: 30W Voltage: AC:110V~220V
Working temperature: -20 °C ~ 55 °C
Product exterior dimension:
2200mm*800mm*600mm
Product interior dimension:
2050mm*700mm*600mm
Net weight: 75KG Gross weight: 90KGS
