A baggage x ray screening system is a device that uses an x-ray beam to scan the contents of luggage and other baggage. The device can be used to screen baggage before it enters a conveyor belt, or it can be set up after the conveyor belt has already moved the items through.
The most common applications for baggage x rays are in airports and train stations, where people are screened for contraband items such as weapons and drugs. Baggage x rays are also used in schools and colleges to detect metal objects that could be concealed under clothing.
The most common types of baggage x rays use either a single-photon or cone-beam geometry. Single-photon systems use a small source of radiation that produces a single high-energy photon at each pixel on the detector's surface. The energy of this photon is proportional to its wavelength; therefore, these systems are capable of detecting metal objects at very low levels (e.g., less than 20 milligrams). Cone-beam systems use multiple detection sources (typically 1 or 2) which produce many photons with different wavelengths; this allows them to distinguish between different types of metal objects (such as
Airport security has always been a major concern for travelers, and with the number of travelers increasing every year, it's even more important to be prepared. One of the most common questions we're asked at [company name] is how our products can improve airport security.
To answer this question, we'll first look at what airport security really is. Airport security is the process of protecting passengers, employees and visitors from acts of violence or other criminal acts. It includes the screening of all individuals and their baggage before they are allowed to enter the secure area of an airport.
This means that when you're traveling through an airport, you may have to pass through one or more security checkpoints before your flight takes off. Your airport screening involves having your bags X-rayed, scanned with a metal detector and/or subject to a body scanner (depending on whether it's part of your airline's standard procedure).
One way that [company name] helps airports improve their security is by offering conveyor belt systems which can be used during screening procedures as well as in checkpoints themselves when there isn't enough space for everyone who wants to go through them all at once! We also offer dual energy x-ray machines which allow us to scan luggage without having to remove anything from it first
Single Phase 220VAC, 50 Hz ±
10%
Power consumption 1.0 KVA ± 10%
Baggage slider
Approx. 1m long for Entrance
and 1.5m long for Exit
separately
Rodent protection Fully rodent protected
Radiation Leakage
As per applicable Law &
Regulation with respect to XRay
emiting devices
Duty cycle 100 %Continuous operation, No
V-9
warm up procedure is required
Operating temperature 0 °c to + 40 ° c
Humidity 10 % - 90% , non condensing
Application Domestic/International Airports
2. X- Ray Generator System
2.1 X-ray generator Maintenance free
2.2 Anode voltage
Operating at 160 KV (-5%,
+10%)
2.3 Beam divergence Minimum 60 °
2.4 Beam direction Diagonal From Top to Bottom
2.5 Cooling/Housing Hermetically sealed oil bath in a
Products News Contact Us About Us Service & Support Industries Solutions